線與金屬配件的連結 - 套索結 Uni knot

線與金屬配件的連結 - 套索結 Uni knot


套索結可說是釣線繩結的基本方法,不但可以用來連結材質和粗細各異的約線,也可以把線綁在連結環、轉環、捲線器等。這個繩結基本上和連接釣鉤時所用的內掛結是一樣的。先把線的前端穿過連結環等轉環再反折,然後再度反折做一個繩圈。接著把反折的線頭穿過繩圈,再纏繞在本線上3~4圈。

只要輕拉線頭,結頭就會在和金屬環相距幾公分之處形成。接著把母線拉過來,讓金屬配件和結頭接觸後,用力束緊並剪掉多餘的長度就完成了。

線與線的連結也常用到套索結。作法是讓兩條線交叉,先在其中一條的線頭打出個繩圈,再讓做出繩圈的這條線穿過繩圈並在另一條線上纏繞3~4圈,然後束緊。另外一條線也比照辦理,等到結頭形成後,在同時各往左右一束,讓兩個結頭靠在一起。最後再剪掉多餘的長度就完成了。

The lasso knot can be said to be the basic method of fishing line knotting. It can not only be used to connect lines of different materials and thicknesses, but can also be tied to connecting rings, swivels, reels, etc. This knot is basically the same as the inside knot used when attaching a fishing hook. First pass the front end of the thread through the connecting ring and other swivel rings, then fold it back, and then fold it again to make a rope loop. Then pass the folded thread end through the rope loop, and then wrap it around the original thread 3 to 4 times.

Just pull the thread gently and the knot will form a few centimeters away from the metal ring. Then pull the busbar over so that the metal fittings are in contact with the knot, tighten it tightly and cut off the excess length.

Lasso knots are also commonly used to connect threads. The method is to cross the two threads, first make a loop at the end of one of the threads, then let the thread making the loop pass through the loop and wrap it around the other thread 3 to 4 times, and then tighten it. The other line is also processed similarly. After the knot is formed, at the same time, it is bundled to the left and right, so that the two knots are close together. Finally, cut off the excess length and you're done.

Popular posts from this blog

基本繩結 - 外科醫生結 (1) Surgeon's Knot

基本繩結 - 防脫結 及 8字結 Stop Knot / Overhand Knot / Figure of Eight Knot / Titiwa

基本繩結 - 稱人結 Bowline