釣鉤連接 - 克維拉雙股編織捻根付

釣鉤連接 - 克維拉雙股編織捻根付


為了補強鉤項的部份以避免脫落而斷裂就是編捻的功能。大多用於在船釣以大魚為目標時。補強線用的是克維拉這種新材質,方法就是以它來製作雙股的根付。

作法是先連結釣鉤。把克維拉在釣鉤的軸上繞兩圈,接著拉著線頭做出一個繩圈,把它勾在鉤頸上,最後再用力束緊,結頭就形成了。

接著左手按住釣鉤,分別用右手的食指和大拇指等同時拉住多餘的克維拉和母線的克維拉編捻。要按住已完成的編捻以免恢復原狀,然後在兩條線重疊的同時,放鬆拿著釣鉤的手指力道,就可以自然形成兩條很漂亮的編捻了。

用編捻頭的任一前端做出繩圈,讓整條編捻穿過繩圈兩次後束緊,結頭便會形成。這樣編捻就不會鬆脫了。拖釣時,用它來連結活餌是最適當不過了。

The purpose of twisting is to reinforce the hook neck to prevent it from slipping and breaking. It's mostly used in boat fishing targeting large fish. The reinforcing line uses a new material called kevlar, which is used to create a double-stranded shankatsu (nose tabi).

The method is to first connect the hook. Wrap the kevlar twice around the hook's spool, then pull the line end to make a loop, hook it onto the hook neck, and finally tighten it to form a knot.

Next, hold the hook with your left hand, and use your right index finger and thumb to simultaneously pull the excess kevlar and the main line's kevlar to twist. Hold the completed twist to prevent it from returning to its original shape, then, while the two lines overlap, relax the pressure on your fingers holding the hook; this will naturally form two neat twists.

Use either end of the twist to make a loop, pass the entire twist through the loop twice, and tighten it to form a knot. This will prevent the twist from coming loose. It's ideal for attaching live bait when trolling.



Popular posts from this blog

基本繩結 - 外科醫生結 (1) Surgeon's Knot

基本繩結 - 防脫結 及 8字結 Stop Knot / Overhand Knot / Figure of Eight Knot / Titiwa

基本繩結 - 稱人結 Bowline