Posts

枝線．其他的連結方法 - 枝線．編捻Titiwa結

Image
枝線．其他的連結方法 - 枝線．編捻Titiwa結 連結船釣的胴突型釣組和烏賊擬餌鉤時，編捻Titiwa結是個很方便的選擇。因為它適用所有材質的線，除了PE線以外。而且一開始已經把幹線編捻完畢，最後只要和子線綁在一起就可以馬上完成。除了編捻幹線，也可以連枝線一起編捻，或者在線頭打個單結當作把手等，結法的變化很多。 首先用幹線做出繩圈，用交叉的線的任一邊在繩圈上纏繞3次。 纏到最後，中心也會形成一個小型繩圈，記得邊以手指固定繩圈，邊擰住一繩圈對面的繩圈頂部，讓它穿過小繩圈，然後再次拉緊左右的線。 這時，如果後來的繩圈未能漂亮成形或者大小不均，之後和枝線相連時會比較不好作業，也會影響到釣魚的成果。所以可以用原子筆等圓狀物體先插進繩圈再拉緊左右的線，這樣就會比較順利了。如果想把繩圈縮到極小，原子筆的筆芯就是個很好用的道具了。 When connecting boat fishing rigs with slalom hooks and squid lures, the Titiwa knot is a convenient choice. It works with all line materials except PE line. Since the main line is already twisted, you only need to tie it to the leader to finish. Besides twisting the main line, you can also twist the branch line, or tie a single knot at the end of the line as a handle, etc., offering many knot variations. First, make a loop with the main line. Wrap either side of the crossed line around the loop three times. As you wrap, a small loop will form in the center. Remember to hold the loop with your fingers while twisting th...
Read more

枝線．其他的連結方法 - 枝線．扭轉結

Image
枝線．其他的連結方法 - 枝線．扭轉結 如果要和枝線直接連結，最快速的方法就是扭轉結了。製作枝線時，必須注意一定要讓釣鉤朝向釣竿前端。如果弄反了擺放的位置，就很容易發生水中纏線的麻煩，自然也釣不到魚了。 扭轉結的作法是先把兩條線重疊做出繩圈，一邊按住交叉的部位一邊扭轉繩圈2次。然後把上面綁著釣鉤的兩條線穿過繩圈，最後束緊就完成了。 這個做法適合用在進行誘餌鉤等釣法時，用比較細的線釣到大量沙丁魚的時候。 不論什麼樣的結法，只要簡單、強度又高就算理想的釣魚繩結。眾多的釣魚前輩大概對這點也頗有體悟，所以釣魚繩結中不乏許多結法簡單但強度驚人的繩結。這個繩結也是從以前就沿用至今的方法之一。 The quickest way to connect directly to a branch line is with a twist knot. When making a branch line, it's crucial to ensure the hook faces the tip of the rod. If the position is reversed, tangling in the water will easily occur, preventing you from catching fish. To make a twist knot, first overlap two lines to form a loop. While holding the intersection, twist the loop twice. Then, thread the two lines with the hook attached through the loop and tighten. This method is suitable for bait hook fishing when catching large numbers of sardines with a relatively thin line. Regardless of the knot type, a simple and strong knot is ideal for fishing. Many experienced anglers understand this...
Read more

枝線．其他的連結方法 - 枝線．直結

Image
枝線．其他的連結方法 - 枝線．直結 船釣的魅力除了海裡的大魚，另外就是享受一支釣的樂趣了。當親眼看到用捲線器好不容易才釣上來的魚，那一瞬間的喜悅真是筆墨難以形容。使用鉛鍾或是籠子的誘餌籠釣法，一口氣安裝好幾次釣鉤可說是家常便飯。即然想釣到大魚，那麼釣組就得親力親為，這應該也是理所當然的吧。 直結是最基本的繩結。首先，把幹線和枝鉤重疊拿在手上。這時，不要忘了要把釣鉤朝釣竿的方向擺。 用兩條線打個圈，接著讓其中一邊的線頭穿過繩圈。然後再次穿過繩圈，最後從痘右各自束緊。 剪斷多餘的長度就算完成，不過如果能把枝線放在幹線多繞一圈，讓枝線豎起來的話就更理想了。 枝線的直結一定得穿過繩圈，所以把釣鉤綁在枝線上後會覺得操作有些困難，這是初期有時會遇到的問題。如果對綁釣鉤很有自信，也可以等到枝線連結好了再綁上釣鉤。 The allure of boat fishing lies not only in the large fish of the sea but also in the sheer joy of catching a single fish. The satisfaction of finally landing a fish after much effort with a reel is indescribable. Using a sinker or bait cage, setting up the hook multiple times in one go is commonplace. If you want to catch big fish, you have to be hands-on with your rig – that's only natural. The straight knot is the most basic knot. First, hold the main line and the siding hook overlapping in your hand. Remember to point the hook towards the rod. Make a loop with the two lines, then thread one end through the loop. Then...
Read more

釣鉤連接 - 連結根付和子線

Image
釣鉤連接 - 連結根付和子線 剛開始接觸船釣的時候，通常使用的是巿面上現成的釣組。等到累積了一定的經驗，也實際遇過一些使用上的問題後，就會開始在現成品上做些加工。到了後來甚至全部自已動手做，並且不斷地針對某些部位進行補強，為了就是能有更豐碩的釣果。 等到實際有過幾次子線被牙尖嘴利的大魚咬斷的經驗後，對根付的考量也會跟著改變。 以船釣的大魚為目標物時，根付的補強絕對不能少。如果購買覱面銷售的現成品，很多款式都是已經做成了繩圈或者前端附有繩圈；如果要自已做，就不能省略編織這個動作，所以必須連結根付和子線。 如果要以3股或4股的根付做連結，首先從根付的前端對折，做一個U字型。然後把子線的線頭夾在中間，同樣做個U字型。以子線的線頭在根付的雙線纏繞3~4圈後，穿過最先形成的繩圈，最後用力拉緊就完成了。 When first starting out with boat fishing, I usually used ready-made rigs available in stores. After accumulating some experience and encountering some problems, I started modifying these ready-made rigs. Later, I even made them all myself, constantly reinforcing certain parts to achieve better catches. After experiencing several instances of my leader line being bitten through by large, sharp-toothed fish, my considerations regarding the backseat (knot) changed. When targeting large fish in boat fishing, reinforcement of the backseat is absolutely essential. If you buy ready-made rigs from stores, many already have loops or loops ...
Read more

釣鉤連接 - 附環魚鉤的根付

Image
釣鉤連接 - 附環魚鉤的根付 被稱為Big Game的海水路亞、飛繩釣，其實這些釣法的本身，就是上演一場與怪獸級大魚的格鬥技。所以，一定得月母線、吸震子線、魚鉤線等所有的釣線，打造出有如銅牆鐵壁般的釣組。 因為大西齒和石鯛等對象魚大多擁有一口尖銳的牙齒，第一個要擔心的就是線會不會被咬斷的問題。而因應之道就是開發出以克維拉纖維編織的根付。如果要把它綁在附環的魚鉤上，選擇事先已製成繩圈狀的根付比較方便。 方法有兩種： 1) 首先讓繩圈狀的克維拉穿過鼻環，把魚鉤通過繩圈狀的克維拉穿過鼻環，把魚鉤通過繩圈纏繞3~4圈，最緊本線就完成了。 2) 第二種作法是先把繩圈狀的克維拉纏繞在魚鉤的軸上3~4圈，然後穿過環。不論使用叩一種方法，一定得讓克維拉跑到魚鉤的內側。這是魚鉤和線連結時的基本原則，因為無論綁得再緊，只要線跑到外側的話，就很容易發生線鬆脫、魚鉤斷裂的問題。 Saltwater lure fishing and fly fishing, often called "Big Game," are essentially battles against monstrous fish. Therefore, a robust rig is essential, consisting of the main line, shock absorber, hook line, and all other fishing lines. Since target fish like the bigmouth bass and rock snapper often possess sharp teeth, the primary concern is whether the line will break. The solution is to use a kevlar fiber-woven netuzuke (necklace). When attaching it to a hook with a swivel, a pre-made looped netuzuke is convenient. There are two methods: 1) First, thread the looped kevlar through the no...
Read more

釣鉤連接 - 使用達比(鉤針)的根付

Image
釣鉤連接 - 使用達比(鉤針)的根付 以流經於黑潮的青物為目標，包括紅甘鰺、紅甘、某仔魚等魚。 如果釣到20~50公斤的大魚，就等於發了一筆小財，因此才有錢洲之稱。這種搏大魚的刺激感，正是海釣的精髓所在。 釣法有使用誘餌籠的五目釣和拖釣兩種。所謂拖釣，就是用釣到的中型魚例如室鰺等為餌的釣法。 拖釣絕對少不了根付。為了防止子線被大魚尖釲的牙齒咬斷，同時避免結頭鬆脫，必須選擇可靠的克維拉。 克維拉裡面有芯，所以要先把芯抽出，才能穿過有附環的釣鉤。綁的時候，會使用到達比(鉤針)這種特殊用具。因為這項道具還附一個可以掛東西的鉤子，剛好可以把克維拉塞進抽出芯的空洞再捲上面。 中途先抽出前端，最後剪掉多餘的長度。這個沒有結頭、也不用纏繞線的俐落根付就完成了。 Targeting fish flowing through the Kuroshio Current, including amberjack, red snapper, and small bream, the fishing method is highly valued. Catching a fish weighing 20-50 kg is considered a windfall, hence the nickname "Money Island." This thrill of battling a large fish is the essence of sea fishing. There are two main fishing methods: five-eye fishing using a bait cage and trolling. Trolling uses medium-sized fish, such as mackerel, as bait. Trolling absolutely requires a netuzuke (a type of hook used for trolling). To prevent the leader from being bitten by the sharp teeth of large fish and to avoid loosening the knot, a reliable kevlar ...
Read more

釣鉤連接 - 克維拉線的根付

Image
釣鉤連接 - 克維拉線的根付 克維拉線裡面有芯，而外圍則有編織包圍。首先，剪一段所需的長度，抽出裡面的芯。芯只要一拉就可以很順利的抽出來。 把釣鉤的前端從釣鉤軸的一半長度的地方刺入克維拉線，等到釣鉤通過克維拉的空洞，再從尖端抽出釣鉤。讓鉤頸的部分完全被包住。 把纏繞線和釣鉤的軸並攏，以專門用來捲線軸的道具，仔細地從鉤頸纏至腰部。等到克維拉線幾乎要纏完了，將纏繞線的前端反折，折成一個繩圈，再把纏繞線放在繩圈上繞幾圈。 整個纏繞的長度大約1公分就已足夠。剪掉多餘的線後，再塗上快乾膠和重量線專用的硬化劑就完成了。也有把克維拉放在釣鉤內側，用纏繞線捲的方式。 Kevlar line has a core inside and a braided outer sheath. First, cut the desired length and remove the core. The core can be easily pulled out with a single pull. Insert the tip of the hook into the kevlar line about halfway down the hook spool. Once the hook has passed through the kevlar's hole, pull it out from the tip, ensuring the hook neck is completely covered. Bring the spool of line together and carefully wind it from the hook neck to the waist using a spool-type tool. When the kevlar is almost completely wound, fold the tip of the spool back into a loop, then wrap the spool around the loop several times. The total length of the wrap should be about 1 cm. After trimming off any excess line, ...
Read more