釣鉤連接 - 搖頭結

釣鉤連接 - 搖頭結


搖頭釣鉤是鉤石鯛的釣組之一。至於為何會有這樣奇特的名稱,則出於當石鯛咬住魚餌時,釣鉤會前後搖擺,所以會讓魚兒亳無戒心的吞下魚餌。

作法是把鋼絲穿過釣鉤環後做個小繩圈,再打個結固定。如果繩圈過大,會因鋼絲的反彈使做出來的繩圈比自已預期的大。再用鋼絲加繞1圈,記得要纏得緊一點。

如果繩圈的大小和纏繞的緊度都沒有問題了,再把鋼絲的線頭密實的繞在母線上4~5圈,最後剪掉多餘的長度就完成了。

在纏繞母線的最後步驟中,即使扭轉鋼絲也能纏得很漂亮。盡量把搖頭的部分做得順暢一點,這樣才能增加魚兒咬鉤的機率。

The "shaking hook" is a rig used for catching rockfish. Its unusual name comes from the fact that when the rockfish bites the bait, the hook swings back and forth, enticing the fish to swallow it without suspicion.

To make it, thread a wire through the hook swivel, make a small loop, and tie a knot to secure it. If the loop is too large, the wire's rebound will cause it to become larger than intended. Wrap the wire around the hook once more, making sure it's tight.

If the loop size and tightness are correct, wrap the wire end tightly around the main line 4-5 times, and finally trim off the excess.

In this final step of wrapping the main line, even twisting the wire will result in a neat wrap. Try to make the shaking motion as smooth as possible to increase the chances of the fish biting.



Popular posts from this blog

基本繩結 - 外科醫生結 (1) Surgeon's Knot

基本繩結 - 防脫結 及 8字結 Stop Knot / Overhand Knot / Figure of Eight Knot / Titiwa

基本繩結 - 稱人結 Bowline