線與金屬配件的連結 - 新型石鯛釣繩法

線與金屬配件的連結 - 新型石鯛釣繩法


出現在石鯛釣等釣法,用來連接尼龍線和連結理的繩結。以往的鯛釣,常用桶型或箱型轉環,而且一般的石鯛結除了把線或鋼絲纏在轉環上,連聲柱的部分也會一併纏上。但隨著尼龍線的強度增強,大家也開始使用快連轉環別針和施轉連結環之後,這個繩結也愈來愈普遍。按著字面的上意思,所謂的轉環就是要能夠轉動,否則就失去它的作用了。如果按照以前把線纏在支柱上的方式,有時會讓轉環無法順利轉動。就這點而言,新式繩結則沒有轉環轉動不良的問題。

作法是讓線穿過轉環兩次,做出一個寛鬆的繩圈,再把線繞在繩圈上2次,最後讓前端穿過所有的繩圈再束緊就完成了。作法不但簡單,繩結的構造也不複雜,強度更是高人一等,所以連浮釣也經常使用。

It appears in fishing methods such as stone snapper fishing and is used to connect nylon lines and knots. In the past, barrel-type or box-type swivels were commonly used for sea bream fishing. In general, stone sea bream knots not only wrap the line or steel wire around the swivel, but also wrap around the sound column. However, as the strength of nylon threads increased, and people began to use quick-connect swivel pins and cast-turn links, this knot became more and more common. According to the literal meaning, the so-called swivel ring must be able to rotate, otherwise it will lose its function. If you wrap the line around the post the way you used to, sometimes it will prevent the swivel from turning smoothly. In this regard, the new knot does not have the problem of poor rotation of the swivel.

The method is to pass the thread through the swivel twice to make a loose rope loop, then wrap the thread around the rope loop twice, and finally let the front end pass through all the rope loops and then tighten it. Not only is the method simple, the structure of the knot is not complicated, and the strength is superior to others, so it is often used even for floating fishing.


Popular posts from this blog

基本繩結 - 外科醫生結 (1) Surgeon's Knot

基本繩結 - 防脫結 及 8字結 Stop Knot / Overhand Knot / Figure of Eight Knot / Titiwa

基本繩結 - 稱人結 Bowline